5-Layer Cell Culture Flask,Vent Cap, Straight Neck, TC, Sterile, 1/pk, 8/cs Cat.No.:731002

filler

Quantity: Case of 8
Price:
$224.69
Stock:
In stock

Description

5-Layer Cell Culture Flask,Vent Cap, Straight Neck, TC, Sterile, 1/pk, 8/cs
Cat.No.:731002
• Made of high clarity, 100% virgin polystyrene.
• Sterilized by E-beam, SAL=10^-6.
• Non-Pyrogenic, DNase/Rnase free.
• Growth area: 870 cm²、520c
• Individually Packaged in sterile bag.


1Mix cell suspension with medium: Prepare cell suspension of required concentration in a container. Recommended volume is about 30- 50mL per layer.
2Add the mixed liquid into the Multi-layer Flask slowly with serological pipettes. To avoid foam and bubbles, allow liquid stream to flow along the slope of the Multi-layer Flask. (Save a little
liquid in pipette each time.)
3Tips: A 10 mL pipette allows media to be dispensed at the bottom of the vessel. A 25 mL pipette allows media to be dispensed just past the NEST Logo.
4Hold the Multi-layer Flask upright with the Logo facing you and tilt clockwise to a 45° angle on a flat work surface to partition the liquid into each layer.
5While holding the Multi-layer Flask at a 45° angle, gently lay it flat onto the work surface with logo facing up.
6After placing the Multi-layer Flask flat on a work surface, gently rock back and forth and side-to-side to distribute cells evenly onto culture surfaces.
7Tips: Be careful to avoid foaming of medium, and not to spill liquid from each layer.
8Repeat Step 3 to put the flask quickly and slightly into the incubator . Then, lay it flat as shown in Step 4. You may choose to either aspirate or pour the media from Multi-layer Flask.
9Aspirating method: To aspirate or remove media, tilt Multi-layer Flask, with the NEST Logo facing you, counter-clock wise to a 45° angle while inverting the Multi-Flask toward you. Then,
tilt Multi-layer Flask to the right, continuing to aspirate all residual media.
10Pouring method: With Logo facing you, pour spent media from Multi-layer Flask
11Tips: Aspirate media using a NEST 2 mL or 10mL aspirating pipette.
12Wash with buffer for one time and add dissociating reagent (≥5mL per layer). Then, follow Steps 3-4 to distribute to dissociating reagent to each layer.
13Neutralize with inactivating solution and mix following Steps 3-4. Gently swirl to dislodge cells completely.
14Follow Step 7 “Aspirating Method” protocol and collect cell suspension using a NEST 10mL serological pipette.
15Follow Step 8 “Pouring Method”. Pour the cell suspension into a NEST conical tube.
16Rinse with additional wash buffer if needed.
17Search "NEST Multi-layer Flask" video on NEST website or Youtube.

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed